Need help?Do you have a question about the Honeywell Morley-IAS ZX Series and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | Morley-IAS ZX Series |
| Category | Control Panel |
| Language | English |
Procedure to access panel commissioning functions using Level 3 password.
Ensure panel memory is cleared and factory settings are applied.
Steps for auto-learning and configuring devices on signalling loops.
Steps for auto-learning and configuring peripheral units.
Steps to program sounder and relay outputs for operation.
Setting up delayed, sensitivity, or verification modes.
Configuring panel address and network settings.
Final checks and setting passwords before normal operation.
How to enter the panel's configuration mode.
Options for configuring signalling loops and devices.
Facility to automatically detect devices on a loop.
Manual calibration/contamination check for detectors.
Dividing the system into zones and assigning devices.
Viewing detailed information about devices on a loop.
Modifying device settings like text, zone, and action.
Entering or modifying the text description for device locations.
Adjusting pre-alarm and alarm levels for detectors.
Configuring input/output devices on the RS485 peripheral bus.
Programming ringing patterns for sounders relative to zones.
Software compatibility for PC programming.
To Next Page