Need help?Do you have a question about the Honeywell Fire-Lite Alarms MS-5UD Series and is the answer not in the manual?
General| Number of Zones | 5 |
|---|---|
| Dimensions | 14.5" (36.83 cm) H x 12.75" (32.39 cm) W x 3.5" (8.89 cm) D |
| Weight | 11 lbs (5 kg) without batteries |
| Zone Configuration | Class B |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Type | Control Panel |
| Compatibility | Compatible with Fire-Lite devices |
| Compatible Devices | Fire-Lite detectors, modules, and other compatible devices |
| Communication | Optional dialer |
| Standby Current | 150 mA |
| Auxiliary Power Output | 24 VDC, 500 mA |
| Humidity Range | 10% to 93% non-condensing |
Describes where smoke detectors may fail and heat detector maintenance.
Discusses limitations of warning devices and user response.
Covers AC power dependence and battery backup.
Covers power disconnect, software testing, and environmental specs.
Guidelines for handling static-sensitive components.
Lists the main capabilities and versions of the FACP.
Details AC power, current draw, and other technical parameters.
Describes panel interface elements and core parts.
Lists available add-ons and their functions.
Covers backbox mounting and AC/battery power connections.
Details connecting initiating devices and notification appliances.
Covers power-limited wiring and digital communicator setup.
Guides for adding converter, transmitter, and ANN-BUS modules.
Covers ANN-BUS wiring, addressing, and device setup.
Overview of user/remote/local programming and initial power-up.
Navigating and configuring system settings via keypad.
Programming specific input zones and notification appliance circuits.
Configuring relay functions and system-wide settings.
Configuring ANN-BUS modules and the digital communicator.
Explains button functions and LED meanings.
Describes normal, trouble, alarm, and supervisory operations.
Details hazard, medical, waterflow, and detector functions.
Covers walktesting and reading system status.
Event priority order and compatible receivers.
Steps for transferring programs and data.
Details on code verification and data protection.
Calculating power requirements and current loads.
Determining battery capacity based on NFPA standards.
Format details and typical printout examples.
Equipment and configurations for NFPA 72 standards.
Specific installation notes for Canadian models.
To Next Page