MS-5UD & MS-10UD Series Manual — P/N 52626:C2 1/24/2012 127
Read Status Operating Instructions
Pressing 1 for Superv Phone Line will cause the following screen to be displayed:
This screen indicates whether or not Phone Line 2 is being supervised by the DACT. The factory
default setting is Phone Line 2 supervised (Yes).
4.19.12 Service Terminal
Pressing 3 while viewing Read Status Screen #4 will display the following screens:
The Ring Count is displayed as the first item in the Service Terminal Screen.
SUPERVISE PHONE LINE
PHONE LINE 2 YES
READ STATUS
1=CENTRAL STATION
2=PHONE LINES
3=SERVICE TERMINAL
Read Status Screen #4
SERVICE TERMINAL
RING COUNT 03
Service Terminal Screen
To Next Page
Loading...
