11
USE & OPERATION
Remote Control
Do not drop the remote control.
Note :
Do not place the remote control in direct sunlight.
The functions work the same as the portable air conditioner’s touch controls. All key functions
can be accessed from the remote control.
Mode
Up
Down
ON/OFF
Fan Speed
Timer
Power Control
The power control turns
the unit on and off
ModeControl
The Mode Control has 3 settings:
• Cool • Dehumidify • Fan
The settings area djusted by Mode Control
button.
• Cooling Mode
During the cooling mode the air is cooled and
hot air is exhausted to the outside through the
exhaust tube. Adjust fan speed and air
temperature to suit your desired comfort level.
Note : The air exchange hoses must vent
outside the room when using Cool Mode.
• Dehumidify Mode
Air is dehumidified as it passes through air
conditioner, without being in full cooling mode.
If room temperature is higher than 25℃ fan
speed can be adjusted; otherwise fan speed is
fixed to " low ".
Note : If the unit will be used mainly as
dehumidifier, do not connect the exhaust hose
and let the warm air return in the room.
Continuous drainage is then necessary and
more efficient
• Fan Mode
Air is circulated throughout the room with no
cooling.
Note: unit does not need to be vented in Fan
Mode.
FanSpeedControl
The Fan Speed Control has 3 settings:
Auto, High, Medium, andLow.
Temp Set Controls
Press “Up” or “Down” to set temperature,
The setting range is from 61℉ to 89℉.
Note: When using DEHUMIDIFITY or FAN MODE,
temperature setting button invalid.
Timer Seting Control
• When you use the timer setting
button while the unit is operation,
you can preset a timer for the unit
to turn off.
• When you use the timer setting
button while the unit is on standby,
you can preset a timer for the unit
to turn on.
• If you press the "ON/OFF" button,
the preset timer function will be
cancelled.
• Timer setting range is 1~24 hours.
To Next Page
Loading...
Need help?
General
