Honeywell MILLER TURBOLITE+ Series User Manual

I371 Rev A
MFP9138126
Jan 2023
USER
MANUAL
MILLER TURBOLITE+
SELFRETRACTING LIFELINES - PERSONAL, SRLP
TURBOLITE
™
+
Personal Fall Limiter
MFP9138123 Rev. A
Class
1
Anchor at or
above dorsal
D-ring
Scan for
additional
product informa-
tion
Scorpion
TURBOLITE
™
+
Scan for
additional
product
information
Class
1
Anchor at or
above dorsal
D-ring
MFP9138140 Rev. A
Black Rhino
TURBOLITE
™
+
Scan for
additional
product
information
Class
1
Anchor at or
above dorsal
D-ring
MFP9138141 Rev. A
Personal Fall Limiter
MFP9138151 Rev. A
TURBOLITE
™
FLASH+
Class
1
Anchor at or
above dorsal
D-ring
ARC
FLASH &
HOT
WORK
Tested according to the latest ASTM F887 standard
TURBOLITE
™
+
Personal Fall Limiter
MFP9138123 Rev. A
Class
1
Anchor at or
above dorsal
D-ring
Scan for
additional
product informa-
tion
TURBOLITE
™
+
Personal Fall Limiter
MFP9138123 Rev. A
Class
1
Anchor at or
above dorsal
D-ring
Scan for
additional
product informa-
tion
*Refer to variable label for unit compliances.
Contact manufacturer if instruction manual is needed.
TURBO
T-BAK
™
+
Personal Fall Limiter
Scan for
additional
product
information
SPECIFICATIONS
Max Total Arrest Distance 24 in
(Distance Totale D’Arrêt Max)
(0,6m)
[24 in - ANSI Free Fall Limit]
Max Capacity 420 lbs
(Capacite Max)
(190,5kg)
[130 lbs-420 lbs - ANSI Capacity Range]
Avg/Max Fall Arrest Force 900 lbf/1800 lbf
[when tested to ANSI Z359.14-2021*]
Max Fall Arrest Force 1800 lbf [420 lb user]
(Force D’Arrêt
4kN [140,6kg utilisateur]
De Chute Max)
8kN [181,4kg utilisateur]
[when tested to CSA Z259.2.2 &
ANSI Z359.14-2021*]
Lifeline (Filin) Polyester/Vectran
[7.5’ (2,3m) x 1” (25,4mm) x .075” (1,9mm)]
Class
1
Anchor at or
above dorsal
D-ring
MFP9138131 Rev. A
SAFELY TIE-BACK
MFP9138133 REV. A
SAFELY
TIE-BACK
MFP9138134 REV. A

Honeywell MILLER TURBOLITE+ Series Specifications

General

Brand	Honeywell
Model	MILLER TURBOLITE+ Series
Category	Safety Equipment
Language	English

Summary

Fall Protection Requirements

General Requirements

All warnings and instructions must be provided to authorized persons/users.

Capacity

Specifies maximum capacity for one person, including body weight, clothing, and tools.

System Compatibility

Honeywell Miller fall protection products are designed for Honeywell-approved components only.

Anchorage Requirements

Details anchorage capacity requirements for supporting workers and meeting safety factors.

Limits of Use

Specifies that SRLs are for fall arrest only, not restraint or positioning devices.

General Use Warnings

Warnings regarding protection from heat sources, sharp objects, and hazards not designed for.

Installation and Use

Connecting to Body Support and Anchorage

Instructions for connecting the lifeline end connector to the harness and the unit to the anchorage.

Reverse Configuration

Describes using the SRL in a reverse configuration where the unit is attached to the harness.

Leading Edge Installation

Specific requirements, warnings, and limitations for leading edge applications.

Tie-Back Installation

Instructions for Turbo T-BAK Tie-Back Personal Fall Limiters.

Installation in a Lift Application

Guidelines for installing SRLs in lift applications, including safety criteria.

Twin Turbo G2 Connector

Information about the Twin Turbo G2 Connector.

TurboLite Flash with Quick-Connect

Specific instructions for TurboLite Flash models with quick-connect harness.

Horizontal Use Considerations

Special considerations and warnings for installing SRLs for horizontal use.

Calculating Fall Clearance Distance

SRL Fall Clearance Calculation

Details how to calculate required fall clearance distance for various work applications.

Inspection and Maintenance

Inspection and Operation Testing

Procedures for inspecting equipment before each use and by a competent person.

Maintenance

Covers servicing, cleaning, and storage of the equipment.

Appendix B: Product Labels and Performance Specifications

Appendix C: Inspection and Maintenance Log