Honeywell MK VI - Honeywell EGPWS Line Maintenance Manual; External Faults (Continued); General Failure Code Identifiers

EGPWS LINE MAINTENANCE MANUAL
CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO.: 060-4199-180 REV: G SHEET 34 of 68
THE FOLLOWING INFORMATION IS GIVEN IN THE LEVEL 3 SELF-TEST:
“IRS 1 ATTITUDE MODE SELECTED”
“ MODE 6 INOP-NO Decision Height” (approaching minimums in menu).
“STEEP APPROACH ACTIVATED”
“STEEP APPROACH ENABLED”
“STEEP APPROACH SELECTED”
“VISUAL SUPPRESS ENABLED”
“ALTERNATE VOLUME 1 SELECTED”
“QFE SELECTED”
“ALTN G/S CANCEL”
“OPTIONAL INPUTS SELECTED”
“SINGLE GPS SELECTED”
“DUAL GPS SELECTED”
“SINGLE GPIRS SELECTED”
“DUAL GPIRS SELECTED”
“DUAL ILS SELECTED”
“DUAL RA SELECTED”
“TRIPLE RA SELECTED”
““WINDSHEAR DISABLED”
“WINDSHEAR INOP DISABLED”
“SIM REPOSITION ENABLED”
“BANK ANGLE DISABLED”
“ALTERNATE RA 1 SELECTED “
“ALTERNATE RA 2 SELECTED “
“ALTN GPS BUS SPEED SELECTED “
“PWS OPTION 1 SELECTED “
“’PWS OPTION 2 SELECTED”
“ALTERNATE POP UP SELECTED “
“BANK ANGLE OPTION 1 SELECTED”
“BANK ANGLE OPTION 2 SELECTED”
“CONFIGURATION OPTION 1 SELECTED”
“CONFIGURATION OPTION 2 SELECTED”
“ALTERNATE MODE 4B REV SELECTED”
“LAMP FORMAT 2 SELECTED”
“ALTERNATE DISPLAY 1 SELECTED”
“ALTERNATE DISPLAY 2 SELECTED”
“ALTERNATE DISPLAY 3 SELECTED”
“ALTERNATE DISPLAY 4 SELECTED”
“ALTERNATE DISPLAY 5 SELECTED”
“ALTERNATE DISPLAY 6 SELECTED”
“ALTERNATE DISPLAY 7 SELECTED”
“ALTERNATE DISPLAY 8 SELECTED”
“ALTERNATE DISPLAY 9 SELECTED”
“ALTERNATE VOLUME 2 SELECTED”
“ALTERNATE MODE 6 VOLUME” SELECTED”