Honeywell MK VI - Honeywell EGPWS Line Maintenance Manual; Display Switching Relays (If Installed) Removal and Installation

EGPWS LINE MAINTENANCE MANUAL
CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO.: 060-4199-180 REV: G SHEET 68 of 68
18 APPENDIX H: LOW AIRSPEED MONITOR MAINTENANCE MESSAGES
TABLE H-1: LOW AIRSPEED MONITOR MAINTENANCE MESSAGES
MAINT.
FUNCTION
MESSAGE
Except where noted, all maintenance
message voices are Male
NOTES:
All volume levels at same volume as
existing EGPWS Self-Test messages
Self-Test Level 1 ”Airspeed Low” Low Airspeed Monitor enabled, functioning, has
all required input information.
Self-Test Level 1
“Airspeed Low Inhibited”
Low Airspeed Monitor enabled, but the advisory
have been inhibited via aircraft wiring.
Self-Test Level 1 “Airspeed Low INOP” Low Airspeed Monitor enabled but the function
is inoperative.
Self-Test Level 3
(Annunciated at
end of Selected
Options )
“Airspeed Low Inhibited”
Low Airspeed Monitor enabled, but the advisory
have been inhibited via aircraft wiring.
NOTE: Operators/Installers must refer to their Instructions for Continued Airworthiness (ICA) documentation to
identify the approved configurations specific to their aircraft type/model having Low Airspeed Monitor
installed.