EasyManuals Logo

Honeywell MN10CES User Manual

Honeywell MN10CES
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
It is important that the installation instructions below are followed for successful installation of this
portable air conditioner. Please call Customer Support if you have any difficulties or queries regarding
these installation procedures.
1. Install the plastic hose with window bracket adapter and hose connector on both sides.
Ensure proper fit on both ends.
2. Adjust the window bracket as per width or
height of your window and insert the plastic
pins to fix at the desired position.
There is a hole where the Plastic Hose will be
inserted later. Make sure this hole is not
blocked.
3. Connect the plastic hose to the hose
connector on back of the unit.
Push-in until it is locked in place.
4. Connect the window bracket to the opposite
end of the plastic hose.
Ensure that all connections are tight and
installed properly.
Note:
After setting the window bracket to the size of your
window, please remove it from the window and
follow the instructions below.
INSTALLATION
1.
2.
3.
4.
5.
Window Bracket Kit.............................
Window Bracket Panel Adapter...........
Plastic Pin............................................
Hose Connector..................................
Plastic Hose........................................
Installation
Kit:
Installation Steps:
1 Set
1 Piece
2 Pieces
1 Piece
1 Piece
Plastic Pin
Hole for Plastic Hose20" to 47" (50.5cm to 119cm)
5. Connect the window bracket to the window.
6. The Portable Air Conditioner is now ready to use.
1
2
5
3
x 1
x 1x 1
x 2 x 1
4
Plastic Pin
EN 3
Plastic Hose:
Dia. 5" (12.7cm)
Length: 12" to 47" (30cm to 120cm)

Other manuals for Honeywell MN10CES

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell MN10CES and is the answer not in the manual?

Honeywell MN10CES Specifications

General IconGeneral
Timer typeDigital
Noise level50 dB
Variable powerYes
Number of speeds3
Airflow (high speed)294 m³/h
Cooling capacity (max)1000 BTU/h
Timer duration (maximum)24 h
Air conditioner functionsCooling, Dehumidifying, Ventilating
Cooling capacity in watts (nominal)- W
Cooling energy efficiency (EER, W/W)-
Hourly energy consumption (cooling)- kWh
Display typeLED
Product colorBlack, Silver
Weight and Dimensions IconWeight and Dimensions
Depth385 mm
Width460 mm
Height746 mm
Weight29100 g
Package depth475 mm
Package height870 mm
Package weight33800 g

Related product manuals