Honeywell MN10CES User Manual

• Cooling Mode
Adjust fan speed and air temperature to suit your desired comfort level.
Temperature setting range is 16°C- 32°C (61°F- 89°F).
• Fan Mode
For air circulation without air conditioner cooling.
•
Dehumidifying Mode
Air is dehumidified as it passes through the unit, without being in full cooling mode. If room tempera-
ture is higher than 25°C (77°F) fan speed can be adjusted; otherwise fan speed is preset to LOW.
Note: If the unit will be used mainly as a dehumidifier, do not connect the exhaust hose. Continuous
drainage is then necessary (refer to Continuous Draining for Dehumidifier Mode).
USE & OPERATION (CONTINUED)
MODE CONTROL
3 settings: Cool, Dehumidify, Fan.
The corresponding indicator light will illuminate to indicate the current mode setting.
FUNCTION BUTTONS (CONTINUED)
EN 5
*Applicable for models with Heating feature only.
•
Heating Mode*
When heating mode is selected the indicator light will shine. Heating is activated only when the ambient
temperature is below 25°C (77°F). In this mode, the desired temperature can be set between 16°C- 25°C
(61°F- 77°F).
Note: The air exchange hoses must vent outside the room when using heating mode.
4 settings: Cool, Heater*, Dehumidify & Fan.

Honeywell MN10CES Specifications

General

Timer type	Digital
Noise level	50 dB
Variable power	Yes
Number of speeds	3
Airflow (high speed)	294 m³/h
Cooling capacity (max)	1000 BTU/h
Timer duration (maximum)	24 h
Air conditioner functions	Cooling, Dehumidifying, Ventilating
Cooling capacity in watts (nominal)	- W
Cooling energy efficiency (EER, W/W)	-
Hourly energy consumption (cooling)	- kWh
Display type	LED
Product color	Black, Silver

Weight and Dimensions

Depth	385 mm
Width	460 mm
Height	746 mm
Weight	29100 g
Package depth	475 mm
Package height	870 mm
Package weight	33800 g