EasyManuals Logo

Honeywell MN10CESBB User Manual

Honeywell MN10CESBB
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
When there is excess water condensation inside the unit, the air conditioner stops running and
shows a warning light (refer to page 10). This warning light indicates that the water condensation
needs to be drained using the following procedures:
WATER CONDENSATION DRAINAGE
14
Dehumidifier Mode
Drain Plug
(De-Humidifier
Mode)
Unplug the unit from power source.
Place a shallow pan under the drain plug. See diagram.
Remove the drain plug.
Water will drain out and collect in the shallow pan.
After the water is drained, replace the cap firmly.
You can now turn on the unit.
Air Conditioning Mode
Water Condensation Drainage
1.
2.
3.
4.
5.
6.
Unplug the unit from power source.
Remove the drain plug.
Connect the drain connector to a ¾” hose(not included). See diagram.
Drain the water condensation into a bucket or a floor drain.
After the water is drained, replace the cap firmly.
You can now turn on the unit.
1.
2.
3.
4.
5.
6.
Drain Plug
(AC Mode)
Water Drain Pipe
Water may need to be drained in high humidity areas
Shallow Pan
(Not included)

Other manuals for Honeywell MN10CESBB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell MN10CESBB and is the answer not in the manual?

Honeywell MN10CESBB Specifications

General IconGeneral
BrandHoneywell
ModelMN10CESBB
CategoryAir Conditioner
LanguageEnglish

Related product manuals