EasyManuals Logo

Honeywell MN12CES User Manual

Honeywell MN12CES
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
The supplied exhaust hose can be extended from 12 inches (1 foot) to 47 inches
(3.9 feet).
Do not bend (to the extent shown below) the exhaust hose.
A bent hose will block exhaust air and cause the unit to malfunction or shut-off.
The length of the exhaust hose is determined by the product specifications. Do not
replace or lengthen it as this could cause the unit to malfunction.
Make sure the back of the unit is at least 20 inches away from a wall.
Do not place the unit in front of curtains or drapes as this could obstruct the
airflow.
9
INSTALLATION
Note:
1.
2.
RECOMMENDEDNOT RECOMMENDED
Warning:
MIN. 14”
20”
MAX. 40”

Other manuals for Honeywell MN12CES

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell MN12CES and is the answer not in the manual?

Honeywell MN12CES Specifications

General IconGeneral
TypeSplit mobile air conditioner
Air filterYes
Hose length1.2 m
Noise level53 dB
Hose diameter127 mm
Number of speeds3
Refrigerating mediumR410A
Cooling capacity (max)12000 BTU/h
Dehumidifying capacity31 l/h
Air conditioner functionsCooling, Dehumidifying
Cooling temperature range16 - 31 °C
Suitable for room area up to45 m²
Cooling capacity in watts (nominal)- W
Cooling energy efficiency (EER, W/W)-
Display typeLED
Product colorBlack
AC input voltage220 - 240 V
Hourly energy consumption (cooling)- kWh
Weight and Dimensions IconWeight and Dimensions
Depth386 mm
Width459 mm
Height744 mm
Weight33792 g

Related product manuals