Honeywell MP Compact Mark III - Replace Platen Roller

Chapter 5 — Printer Maintenance
MP Compact4 Mark III User Guide 31
Replace Platen Roller
To remove
1 Turn the printer off and unplug the printer. Unlock the printhead latch and
remove any media installed in the printer.
2 Lower the front panel (item 1).
3 Using a pen or similar tool press (item 2) in on the top cover release (item 3)
and raise the top cover (item 4).
4 Insert your finger through the access hole (item 2) and push out the platen
roller cover (item 1).