Honeywell MS4104F1010 User Manual

PRODUCT DATA
63-2740-02
MS4104, MS4109, MS4604, MS4609, MS8104,
MS8109 Fast-Acting, Two-Position Actuators
FOR FIRE/SMOKE CONTROL APPLICATIONS
APPLICATION
The MS4104, MS4109, MS4604, MS4609, MS8104 and
MS8109 Fast-Acting, Two-Position Actuators are spring return
direct coupled actuators (DCA) for Fire and Smoke dampers
(on/off control). The actuator accepts an on/off signal from a
single-pole, single-throw (SPST) controller. Reversible
mounting allows actuator to be used for either clockwise (cw)
or counterclockwise (ccw) spring rotation.
FEATURES
• 30 lb-in. (3.4 N•m) or 80 lb-in. (5.9 N•m) minimum
driving torque at 350°F (176°C).
• Reversible mounting facilitates use in either clockwise
(cw) or counterclockwise (ccw) spring rotation.
• Integral spring return ensures level of return torque.
• Fifteen-second spring return timing.
• No special cycling required during long-term holding.
(See Operation section.)
• No audible noise during holding.
• Patent pending design eliminates need for limit
switches to reduce power consumption.
• Models available for 24, 120, and 230 Vac.
• Ninety-five degree angle of rotation.
• Actuator holds rated torque at reduced power level.
• Die-cast aluminum housing.
• Housing design allows flush mounting to damper.
• Designed to operate reliably in smoke control systems
requiring Underwriter’s Laboratories Inc. UL555S
ratings up to 350°F.
• Models available with SPST position-indicating
switches (7°, 85° stroke).
Contents
Application ........................................................................ 1
Features ........................................................................... 1
Specifications ................................................................... 2
Ordering Information ........................................................ 2
Installation ........................................................................ 4
Operation .......................................................................... 6
Checkout .......................................................................... 6

Honeywell MS4104F1010 Specifications

General

Brand	Honeywell
Model	MS4104F1010
Category	Controller
Language	English

Summary

FEATURES

APPLICATION

SPECIFICATIONS

Model and Electrical Specs

Covers actuator models, voltage, power consumption, and torque ratings.

Physical and Ordering Info

Includes dimensions, weight, and product ordering details.

Operational and Environmental Specs

Details timing, cycling, life, approvals, and environmental ratings.

Accessories

Mentions optional accessories like mounting brackets.

INSTALLATION

Location and Mounting

Guides on positioning and securing the actuator to the damper housing.

Preparation and Wiring

Covers pre-installation steps and typical wiring diagrams.

OPERATION

CHECKOUT Procedures

120 Vac Model Verification

Steps to verify the operation of the 120 Vac actuator model.

230 Vac Model Verification

Steps to verify the operation of the 230 Vac actuator model.

24 Vac Model Verification

Steps to verify the operation of the 24 Vac actuator model.