Honeywell NOTIFIER AM1000

AM-1000 Programming manual Page 7
AM1000_manu Doc. M-145.2-AM1000-ENG Rev A.1 NOTIFIER ITALIA
 Zone in alarm Condition
The following screen is visualized when there is a zone in alarm.
With 56it is possible to visualize the list of the zone in alarm.
Pressing the key
it is possible to visualize on the display the list of the points in alarm inside the selected
zone, with 56 it is possible to visualize the list of the devices in alarm.
 Zone in trouble Condition
The following screen is visualized when there is zone in trouble. At first also the troubles are visualized for
each zone.
With 56 it is possible to visualize the list of the zone in trouble.
With the first pressure of the return key it is visualized the list of the devices with the indication of the
point name, see following plate:
First zone in alarm.
Programmed text for the
zone.
Last zone in alarm.
Programmed text for the
zone.
Hour and date of the event .
Hour and date of the
Device in alarm
S = detector
M = module
Programmed text for
the device.
Hour and date of the event
Zone in trouble
Programmed text for
the zone.
Hour and date of the event
Meter of the zone in alarm.
Meter of events.