Page 2 Programming manual AM-1000
NOTIFIER ITALIA Doc. M-145.2-AM1000-ENG Rev A.1 AM1000_manu
RESET : the pressure of this key delete the memory of the alarms and points troubles
present at the moment.
De-activate the sounders and turn off the lighted signals fo the detectors in alarm.
To do this procedure it is necessary to know the password of level 2.
Keys to be used: DURING THE PROGRAMMING OR
TO INTRODUCE THE PASSWORD
.
.
ARROWS : To be used to select something or to introduce some characters.
% Note: pressing one of hte keys more than 1 second the text is automatically repeated.
ENTER: after a selection it confirms the inserted data.
ESCAPE : to “go back”, it deletes the last introduced data or has the function to exit the
menù
FUNCTIONS KEYS: This kind of keys active the function that correspond with them on the
display. They change the selected menù to functions.
Example: in the screen “Installation status” these keys allow to enter the menù regarding the
programming, utility, Exclusion or Test.
To Next Page
Loading...
