Need help?Do you have a question about the Honeywell PRO22IC and is the answer not in the manual?
Turn off the external circuit breaker before installation and verify voltage.
Ensure alternative exits and obtain written approval for electronic door control.
Ensure all enclosures are properly EARTH grounded.
Use S-4 suppressors on all door strikes; recommends only DC strikes.
Details warranty period, service, and conditions that void the warranty.
Details voltage, current consumption, and wiring polarity for power supply.
Provides a numbered sequence for setting up jumpers, boards, and wiring.
Illustrates connections for power, tamper, power fail, RS-232, and RS-485 ports.
Turn off the external circuit breaker before installation and verify voltage.
Ensure alternative exits and obtain written approval for electronic door control.
Ensure all enclosures are properly EARTH grounded.
Use S-4 suppressors on all door strikes; recommends only DC strikes.
Details warranty period, service, and conditions that void the warranty.
Details voltage, current consumption, and wiring polarity for power supply.
Provides a numbered sequence for setting up jumpers, boards, and wiring.
Illustrates connections for power, tamper, power fail, RS-232, and RS-485 ports.
General| Series | PRO |
|---|---|
| Communication | RS-485 |
| Operating Temperature | 0 to 49 °C (32 to 120 °F) |
| Output Type | Relay |
| Outputs | 1 |
To Next Page
