Need help?Do you have a question about the Honeywell PRO22R2 and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | PRO22R2 |
| Category | Controller |
| Language | English |
Before installation, turn off the external circuit breaker. Verify voltage before connecting the device.
Ensure alternative exits for critical entry points and obtain written approval from local fire officials.
Ensure all enclosures are EARTH grounded and use suppressors on all door strikes.
File claims with the carrier for any shipment damage noticed before unpacking.
Use static shield packaging and controlled workstations to prevent damage to sensitive components.
Equipment complies with FCC Part 15 for commercial use; residential use may cause interference.
Document data is proprietary. Product use subject to software agreement and terms.
Details customer responsibilities for product liability claims and indemnification of Engineering Systems.
File claims with the carrier for shipment damage before unpacking. Inspect contents carefully.
Contact customer service for RMA, provide problem description, PO/invoice number before shipping.
Details the PRO-2200 Remote Enclosure's capabilities, capacity for PRO-2200 panels, and power supply.
Provides physical dimensions, metal thickness, color, and mounting hole details for the enclosure.
Lists the number and size of conduit knockouts on each side of the enclosure.
Warning against using the power supply to power locks; details voltage, transformer, and wiring requirements.
Explains the meaning of AC and DC LED indicators for system status.
Information on the 4.0 amp hour battery, automatic switchover, and backup time.
Lists the Power On Light assembly and Tamper Switch assembly supplied with the enclosure.
Recommendations for replacing the battery and lubricating door hinges.
Specifies the recommended temperature and humidity ranges for operation.
Instructions for installing mounting screws and hanging the enclosure securely.
Guidance on running wiring through conduit, marking wires, and grounding cable shields.
Steps for installing PRO-2200 panels onto standoffs, including using nylon screws.
Connecting power supply, AC FAIL, LOW BATT, Tamper Switch, and communication wiring.
Visual guide showing lock bracket and side view mounting details.
Illustrates left and right open views with component locations and part numbers.
Details NCI part numbers, AWG, description, and maximum distance for various applications.
Instruction on how to specify plenum rated cables by adding 'P' to the part number.
Comprehensive list of NCI cable part numbers, descriptions, applications, and lengths.
To Next Page
