Honeywell PW7K1IC User Manual

Install Guide
Pro-Watch 7000
Intelligent Controller and System
PW7K1IC

Honeywell PW7K1IC Specifications

General

Brand	Honeywell
Model	PW7K1IC
Category	Controller
Language	English

Summary

Chapter 2 Setting Up PW-7000 Hardware

Setting the Jumpers

Explains jumper settings for port interface, termination, and operating mode configuration.

Setting the DIP Switches

Details DIP switch options for normal mode, default credentials, and factory defaults.

Bulk Erase Configuration Memory

Supplying Power to the PW-7000 Interface

Chapter 3 System Configuration

Connecting to ACDSM for the First Time

Guides users through the initial connection and setup of the PW-7000 using the ACDSM web server.

Login Page

Details the login process for the PW-7000 web server, including default credentials.

Home Page

Network Settings

Explains how to access and configure network settings for dynamic or static IP addresses.

Dynamic IP Configuration Method

Outlines the steps to configure the PW-7000 to obtain an IP address automatically via DHCP.

Static IP Configuration Method

Details the process for assigning a static IP address, subnet mask, and default gateway.

Host Communication

IP Server Connection Type

Explains how to configure the PW-7000 for IP Server connection type, including port number and data security.

IP Client Connection Type

Details the configuration for IP Client connection type, allowing the PW-7000 to poll the Pro-Watch Host.

User Configuration

Adding a User

Editing a User

Deleting a User

Restore Default Screen

Apply Setting Screen