Honeywell PW7K1IC - Editing a User; Deleting a User; Restore Default Screen

PW-7000 (PW7K1IC) Installation and Configuration Guide, Document 800-25673V1 35
Step 4. Configure the auto-save timer. This feature, if enabled, automatically
saves the hardware configuration in non-volatile Random Access
Memory (RAM) at the specified time interval. If you select Enable Auto-
Save, then select a time interval from the drop-down list, and click Save
Auto-Save Timer to save the setting.
Editing a User
To edit a user record, click to select the user from the Username column and then
click Edit. Use the information provided in the previous section, “Adding a User,” to
edit the record.
Deleting a User
• To delete a user record, click to select the user from the Username column and
then click Delete.
Restore Default Screen
Step 1. Click the Restore Default link on the navigation bar to restore the default
configuration values for the PW-7000:
Figure 13: PW-7000 Web Server Restore Default Screen
Step 2. Click Restore Default to reload the default factory settings for all the
configuration variables.
Step 3. Click Restore Current to reload the current operational settings for all
the configuration variables.