PW-7000 (PW7K1IC) Installation and Configuration Guide, Document 800-25673V1 29
Figure 7: PW-7000 Web Server Network Settings Screen
Note: The Host Name of This Device field contains the Media Access Control (MAC) address
of the PW-7000 controller board.
Note: The users can select the Dynamic IP option button and reserve an IP address for the
MAC address, or they can select the other option button and assign a Static IP
address as well.
Dynamic IP Configuration Method
Step 1. Click the Dynamic IP option button to select the Dynamic Host Configu-
ration Protocol (DHCP) method to obtain IP address automatically.
Step 2. Click OK.
Note: Pro-Watch communicates with the PW-7000 panel using an IP address. If you must
use the Dynamic IP option because of your network policies or configuration, it is
recommended to reserve an IP address at the DHCP server for the MAC (Media
Access Control) address in the PW-7000 panel. The MAC address is a unique
identifier attached to network adapters. Each time the PW-7000 panel requests an IP
address, the DHCP server will assign the address that was reserved for it.
To Next Page
Loading...
