PRO-2200 Remote Enclosure—PRO22ENC3 7Installation Guide
2. Obtain the Return Authorization Number (RMA) from the customer service
department at 800-323-4576.
3. Show the RMA number on all packages shipped. Packages, which are not marked
with an RMA number will be refused at the factory and returned COD.
4. Carefully pack the equipment for shipment. Use the original packing material when-
ever possible.
Limited Warranty
All Products sold or licensed by Engineering Systems include a warranty registration card
which must be completed and returned to Engineering Systems by or on behalf of the end
user in order for Engineering Systems to provide warranty service, repair, credit or ex-
change. All warranty work shall be handled through Customer which shall notify
Engineering Systems and apply for a Return Merchandise Authorization (RMA) number
prior to returning any Product for service, repair, credit or exchange. Engineering Systems
warrants that its Products shall be free from defects in materials and workmanship for a
period of two years from date of shipment of the Product to Customer. The warranty on
Terminals, Printers, Communications Products and Upgrade kits is 90 days from date of
shipment. Satisfaction of this warranty shall be limited to repair or replacement of
Products which are defective or defective under normal use. Engineering Systems’
warranty shall not extend to any Product which, upon examination, is determined to be
defective as a result of misuse, improper storage, incorrect installation, operation or
maintenance, alteration, modification, accident or unusual deterioration of the Product due
to physical environments in excess of the limits set forth in Product manuals. THERE
ARE NO WARRANTIES WHICH EXTEND BEYOND THIS PROVISION. THIS WARRANTY
IS IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATU-
TORY, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
ANY PARTICULAR PURPOSE. NO REPRESENTATION OR WARRANTY OF THE DIS-
TRIBUTOR SHALL EXTEND THE LIABILITY OR RESPONSIBILITY OF THE MANUFAC-
TURER BEYOND THE TERMS OF THIS PROVISION. IN NO EVENT SHALL ENGINEER-
ING SYSTEMS BE LIABLE FOR ANY RE-PROCUREMENT COSTS, LOSS OF PROF-
ITS, LOSS OF USE, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES TO ANY
PERSON RESULTING FROM THE USE OF ENGINEERING SYSTEMS’ PRODUCTS.
Confidentiality
All software, drawings, diagrams, specifications, catalogs, literature, manuals and other
materials furnished by Engineering Systems relating to the design, use and service of the
Products shall remain confidential and shall constitute proprietary rights of Engineering
Systems and Customer agrees to treat such information as confidential. Customer shall
acquire no rights in the design of the Products or the related materials except to use such
information solely for the purpose of and only during the time it sells the Products. Cus-
tomer shall not copy the design of any of the Products or use or cause to be used any
Product design or related materials for its own benefit or for the benefit of any other party.
The covenants contained in this section shall remain effective throughout the term of this
Agreement and thereafter unless specifically waived by Engineering Systems in writing.
To Next Page
Loading...
Need help?
General
