Honeywell PRO3200 - Compliance Information

4 www.honeywell.com
Installing the PRO3200 Two-Reader Module
Setup
Setting DIP Switches
* = Default
Table 2: DIP Switch Settings
S8 S7 S6 S5 S4 S3 S2 S1 Selection
OFF OFF OFF OFF OFF ADDRESS 0
OFF OFF OFF OFF ON ADDRESS 1*
OFF OFF OFF ON OFF ADDRESS 2
OFF OFF OFF ON ON ADDRESS 3
OFF OFF ON OFF OFF ADDRESS 4
OFF OFF ON OFF ON ADDRESS 5
OFF OFF ON ON OFF ADDRESS 6
OFF OFF ON ON ON ADDRESS 7
OFF ON OFF OFF OFF ADDRESS 8
OFF ON OFF OFF ON ADDRESS 9
OFF ON OFF ON OFF ADDRESS 10
OFF ON OFF ON ON ADDRESS 11
OFFONONOFFOFFADDRESS 12
OFF ON ON OFF ON ADDRESS 13
OFFONONONOFFADDRESS 14
OFFONONONONADDRESS 15
OFF OFF Reserved
OFF ON 9,600 BPS
ON OFF 19,200 BPS
ON ON 38,400 BPS*
OFF
Not Used*