Honeywell PRO3200 - Host Port Connection Settings

17 www.honeywell.com
PRO3200 2-Reader Input Module Programming Sheet
Reader 2
ProWatch Reader 1 (the
reader address used in
the Pro-Watch
hardware setup)
VDC Select J2 5 Volt Connected
Cable #
Cable Destination Conductor
Color
DC Out ( + ) Pin #1
Red LED Pin #2
Beeper Ctrl Pin #3
Data - 1 Pin #4
Data - 0 Pin #5
Common Pin #6
Inputs 6 and 7
Connected
Cable #
Cable Destination Conductor
Color
Input 6 Pin #1
Input 6 Com Pin #2
Input 7 Pin #3
Input 7 Com Pin #4
Outputs 4 and 5
Connected
Cable #
Cable Destination Conductor
Color
Relay 4 NC Pin #1
Relay 4 Com Pin #2
Relay 4 NO Pin #3
Relay 5 NC Pin #4
Relay 5 Com Pin #5
Relay 5 NO Pin #6