10 PX4ie and PX6ie High Performance Printer User Guide
Internal Fanfold
Guides
Use the internal fanfold guides to facilitate
loading media from an external supply.
The internal fanfold guide cannot be used in peel-
off (self-strip) mode or with the label slack
absorber.
.
Label Taken Sensor The label taken sensor (LTS) is a photoelectric
sensor that enables the printer’s firmware to
detect if the last printed label, ticket, tag, etc. has
been removed before printing another copy.
The LTS cannot be used with a paper cutter.
Interface Boards A number of interface boards are available for use
with the printer.
The interface boards are either installed at the
factory or can easily be installed by an Intermec
authorized service technician.
The printer can accommodate these interface
boards:
-802.11 Radio Interface Board
-Parallel Interface Board (IEEE 1284)
-Double Serial Interface Board
-Serial/Industrial Interface Board
-RFID Interface Board
Option/Accessory Description
To Next Page
Loading...
