Owner’s Manual
Read and save these
instructions.
For help please visit
yourhome.honeywell.com
RLV3100
Digital
Non-programmable
Thermostat
Application
The RLV3100 thermostat can be used to control an electric heating system such as an
electric baseboard heater, a radiant ceiling, a radiant floor, a convector, etc.
The thermostat cannot be used with the following:
• a resistive load under 2 A
• a resistive load over 12.5 A
• systems driven by a contactor or a relay (inductive load)
• fan-forced heating systems
• central heating systems
Supplied Parts
• One (1) thermostat
• Two (2) 6-32 mounting screws
• Two (2) solderless connectors
Percentage of
heating time *
100%
75–99%
50–74%
25–49%
1–24%
Temperature display
* The thermostat displays the percentage of heating time required to maintain the desired
temperature. For example, is displayed when heating is activated 40 percent of the time.
Temperature adjustment
buttons
To Next Page
Need help?
General
