Owner’s Manual
Read and save these
instructions.
For help please visit
yourhome.honeywell.com
R LV3120
Non-programmable
Thermostat
Application
This thermostat can be used to control an electric heating system such as a baseboard
heater or a convector.
The thermostat CANNOT be used with:
• a resistive load under 0.83 A
• a resistive load over 8.3 A
• a system driven by a contactor or a relay (inductive load)
• a fan-forced heating system (e.g. : fan-forced convector)
• a central heating system.
WARNING Electrical Shock Hazard.
This thermostat is a line voltage control (120–240 Volts). Do not install it if you are
not completely familiar with house wiring. If handled improperly, there is risk of
electric shock hazard, which may cause serious injury or death.
Do you need assistance? We are here to help.
Call 1-800-468-1502 for wiring assistance before returning the
thermostat to the store.
To Next Page
Need help?
General
