Honeywell RTH5100B - Set Heating Fan Control

RTH5100B
19
Function 3: Heating fan control
NOTE: If Function 3 does not
appear, please turn to the next
page to continue.
Next
3
0
Done
Press to change
setting. When
correct setting is
selected, press
NEXT to display
next function.
Press the s or t button to select your heating
system and fan operation:
0 Gas or oil heat: Use this setting if you
have a gas or oil heating system (system
controls fan operation).
1 Electric heat: Use this setting if
you have an electric heating system
(thermostat controls fan operation).