Honeywell RTH6300B - Set System Type

1
0
NextDone
1
0
NextDone
RTH6300B Programmable Thermostat
17
Function 1: System type
Press the or button to select the type
of climate control system you have in your
home:
Press to change setting.
When correct setting is
selected, press
NNEEXXTT
to
display next function.
0 Heating & cooling: Gas, oil or electric heating
with
central air conditioning.
1 Heat pump: Outside compressor provides both
heating and cooling.
2 Heating only: Gas, oil or electric heating
without
central air conditioning.
3 Heating only with fan: Gas, oil or electric
heating without central air conditioning. (Use
this setting if you could turn the fan on and off
with a fan switch on your old thermostat.)
Installation Guide
16
System setup (set thermostat to match your system)
Next, you must set the thermostat to control the heating and cooling system in
your home. Press and hold the and
FFAANN
buttons to enter system setup.
To begin, press and hold the and
FFAANN
buttons until the display changes:
Function
number
Press or to change settings.
Press
NNEEXXTT
to advance to next function.
Press
DDOONNEE
to exit and save settings.
Setting