Honeywell RTH7400 series Owner's Manual

14
Program Schedule
You can program four time periods each day, with different settings for
weekdays and weekends. We recommend the pre-set settings (shown in the
table below), since they can reduce your heating/cooling expenses.
Wake - Set to the time you
awaken and the temperature you
want during the morning, until
you leave for the day.
Leave - Set to the time you leave
home and the temperature you
want while you are away (usually
an energy-saving level).
Return - Set to the time you
return home and the temperature
you want during the evening,
until bedtime.
Sleep - Set to the time you go to bed and the temperature you want overnight
(usually an energy-saving level).
NOTE: Leave and Return periods can be canceled on weekends.
Heat Cool
Wake
(6:00 am)
70
°
75
°
Leave
(8:00 am)
62
°
83
°
Return
(6:00 pm)
70
°
75
°
Sleep
(10:00 pm)
62
°
78
°
Clock setting
1. To set the current time display,
press CLOCK & MORE, then press s
or t to adjust the time.
Press and hold s or t to advance
the time more quickly.
2. Press DONE to save & exit (or press
GO BACK to exit without changing
the time).
NOTE: The real-time clock should
never require adjustment since it
automatically updates for daylight
savings time, and stores all date/time
information.
System & Fan Schedule Clock & More
MCR28079
Go Back Done
Mon
AM
6
:
01
MCR28080

Honeywell RTH7400 series Specifications

General

Display Type	Digital
Programmable	Yes
Program Periods Per Day	4
Wi-Fi Connectivity	No
Programmability	7-Day
Voltage	24V
Backlight	Yes
Power Source	Battery
Battery	AA
Temperature Range	40°F - 90°F