Honeywell RTH7400 series - Temporary Program Schedule Override; Adjust Temperature Temporarily; Resume Program Schedule

15
To adjust program schedules (RTH7400 only)
1. Press SCHEDULE, then EDIT to see
weekdays.
2. Press SELECT DAY to highlight Mon-Fri
(they will share the same settings).
3. Press NEXT STEP twice, then press s or
t to set Wake time for selected days.
4. Press NEXT STEP, then s or t to set Heat
temperature for this time period.
5. Press NEXT STEP, then s or t to set Cool
temperature for this time period.
6. Repeat steps 3-5 to program other time
periods (LEAVE, RETURN, SLEEP), then
press DONE.
7. Repeat steps 1-6 to program Saturday/
Sunday. (Press s or t until the desired
day is flashing, then press SELECT DAY.)
8. Press DONE to save & exit.
System & Fan Schedule Clock & More
MCR28084
Go Back Edit View
MCR28085
Go Back Next Step Done
Period
Wake
MON
TUE
WED
THU
FRI
Set to
Heat
AM
62
6
:
00
MCR28086
To adjust program schedules (RTH7500/RET97D only)
1. Press SCHEDULE, then EDIT to see
weekdays.
2. Press SELECT DAY. You can select
multiple days to program with the same
settings.
3. Press NEXT STEP twice, then press s or
t to set Wake time for selected day(s).
4. Press NEXT STEP, then s or t to set
Heat temperature for this time period.
5. Press NEXT STEP, then s or t to set
Cool temperature for this time period.
6. Repeat steps 3-5 to program other time
periods (LEAVE, RETURN, SLEEP), then
press DONE.
7. Repeat steps 1-6 to program any
remaining days. (Press s or t until
the desired day is flashing, then press
SELECT DAY.)
8. Press DONE to save & exit.
System & Fan Schedule Clock & More
MCR28084
Go Back Edit View
MCR28085
Go Back Next Step Done
Period
Wake
MON
TUE
WED
THU
FRI
Set to
Heat
AM
62
6
:
00
MCR28086