Honeywell RTH7400 series Owner's Manual

9
10 Set Time and Date
1. Press s or t to set month, then press NEXT.
2. Press s or t to set day, then press NEXT.
3. Press s or t to set year, then press DONE.
4. Press s or t to set time, then press DONE to save and exit.
11 If your system type is...
If your system type is:
q Single Stage Heat and Cool
Congratulations, you’re done!
If your system type is:
q Multistage Heat and Cool
q Heat Pump* without Backup Heat
q Heat Pump* with Backup Heat
q Heat Only
q Cool Only
Continue with Advanced Installation on next page to match your thermostat to
your system type.
*Heat Pump—an air conditioner that provides cooling in the summer, and also
runs in reverse in the winter to provide heating.
If you are not sure of your system type or if you have other
questions, call us toll-free at 1-800-468-1502.
This thermostat works on 24 volt or 750 mV systems. It will NOT work on
120/240 volt systems.
Go Back Next Done
6
15
2006
M28095
Done
10:10
M28096

Honeywell RTH7400 series Specifications

General

Display Type	Digital
Programmable	Yes
Program Periods Per Day	4
Wi-Fi Connectivity	No
Programmability	7-Day
Voltage	24V
Backlight	Yes
Power Source	Battery
Battery	AA
Temperature Range	40°F - 90°F