23 69-1725-1
Step 9. Attach New Thermostat to Wallplate
1. Align the screw blocks with the pins on the back of the
thermostat.
2. Push the thermostat straight onto the wallplate until it snaps into
place.
3. Turn on the power at the heating and/or cooling system or fuse/
circuit breaker panel.
If the wires interfere with mounting the thermostat to the
wallplate, push the excess wire back into the wall opening.
M22213
PINS ON
BACK OF
THERMOSTAT
WALLPLATE
TERMINAL
SCREW
BLOCK
To Next Page
Loading...
