Honeywell RTH8580ZW - Connecting to Z-Wave Network; Joining the Z-Wave Network; Sharing Z-Wave Network Information

11 33-00131ES—01
1 Join Z-Wave network.
1a To join a Z-Wave network, set the Z-Wave controller
to INCLUDE mode.
1b Access system setup. See “Setting functions and
options” on page 16 for information on how to
access system setup.
1c Press st next to the four digit function number,
and scroll to function rf10.
1d Press s next to the single digit option number, and
select option 1 to add thermostat to the Z-Wave
network.
Connecting to Z-Wave network
F
M32422
10
Wait
DONE
0
F
10
2 Share Z-Wave network.
2a Press st next to the four digit function number,
and scroll to function rf20.
2b Press s next to the single digit option number,
and select option 1 to share the thermostat Node
information with additional Z-Wave devices.
2c Press Done to save changes and exit system setup .
For explanation of Z-Wave messages,
see page 22.
Getting Help
DONE
0
F20