15 33-00131ES—01
Adaptive Intelligent Recovery
This feature allows the thermostat to “learn”
how long the heating/cooling system takes to
reach programmed temperature settings, so
the temperature is reached at the time you set.
For example: Set the Wake time to 6:00 am,
and the temperature to 70°. The heat will come
on before 6:00 am, so the temperature is 70°
by 6:00 am.
Note: System setting function 0530 controls
Adaptive Intelligent Recovery. See “System
setup” on page 19.
The message “Recovery” is displayed
when the system is activated before a
scheduled time period.
Compressor protection
This feature forces the compressor to wait
a few minutes before restarting, to prevent
equipment damage.
During the wait time, the message
“Wait” is displayed on screen.
To Next Page
Loading...
