Honeywell RTH8580ZW - Screen Lock, Cleaning, and Z-Wave Removal

33-00131ES—01 14
M29357
SCHED HOLD CLOCK SCREEN MORE
WED
PM
Following
Schedule
Inside
Set To
SCREEN LOCKED
70
6:00
70
FAN
AUTO
SYSTEM
HEAT
Screen lock
To prevent tampering, the screen can be partially
or fully locked.
When partially locked, the screen displays
SCREEN LOCKED for several seconds if a locked
key is pressed. To unlock the screen, press any
unlocked key while SCREEN LOCKED appears on
the screen.
When the screen is fully locked, no keys function.
To lock or unlock the screen, see function 0670
on page 20.
Cleaning the screen
1 Press SCREEN to lock the screen for cleaning.
The screen will remain locked for 30 seconds
so you can clean the screen without changing
any settings.
2 After 30 seconds, press DONE to resume
normal operation, or press SCREEN again if
you require more time for cleaning.
Note: Do not spray any liquid directly on the
thermostat. Spray liquid onto a cloth, then use
the damp cloth to clean the screen. Use water
or household glass cleaner. Avoid abrasive
cleansers.
M32523
Screen lock timer (30 seconds)
SCHED HOLD CLOCK SCREEN USAGE
WED
PM
Following
Schedule
Inside
Set To
SCREEN LOCKED
70
6:00
70
FAN
AUTO
Remove from Z-Wave network
1 Access system setup. See “Setting functions and
options” on page 16 for information on how to
access system setup.
2 Press st next to the four digit function number,
and scroll to function rf10.
3 Press t next to the single digit option number,
and select option 0 to remove thermostat from the
Z-Wave network.
F
M32425
10
DONE
1
F
10
14