Honeywell RTH9580 - Managing Wi-Fi Connections

69-2715EF—07 12
Reconnecting your Wi-Fi network
1 Touch MENU.
2 Select Wi-Fi Setup.
3 Touch the name of the network you want
to use. The thermostat may display a
password page.
4 To enter a password, touch characters to
spell out your home network password,
then touch Done.
5 The thermostat displays “Connecting
to your network. Please wait...” then a
“Connection Successful” screen.
6 Touch Next.
• If your thermostat is registered, you
will see your signal strength and other
status information. Touch Done.
• If the screen displays “Register Online
for Remote Access,” follow instructions
on page 13.
MENU
Wi-Fi Setup
Disconnecting your Wi-Fi network
1 Touch MENU.
2 Select Wi-Fi Setup.
3 Touch Disconnect from Network. The
thermostat will display a question to
conrm your selection.
4 Touch Yes to conrm that you want
to disconnect from the network. The
thermostat will display the Wi-Fi Setup
screen.
5 Touch OK to display the menu.
MENU
Wi-Fi Setup
Disconnect from
Network
Yes