15 69-2715EF—07
Setting the time/date
1 Touch the current time. The screen displays
Set Time/Set Date.
2 Touch Set Time or Set Date.
3 Touch p or q until the proper time/date is
displayed.
4 Touch Done to save or Cancel to ignore
changes.
Note: This thermostat will automatically update
for daylight saving time (if observed in your
area) and all date/time information is stored.
If the thermostat is connected to Wi-Fi and
registered to Total Connect Comfort, the current
time is updated from the internet.
Fri, Jun 14, 2013
6:30 pm
Done
30
Setting the fan
1 Touch FAN to display fan settings.
2 Touch On, Automatic, Circulate, or Follow
Schedule.
3 Touch Done to save and exit.
On: Fan is always on.
Automatic: Fan runs only when the
heating or cooling system is on.
Circulate: Fan runs randomly about 35% of the time (home use
only).
Follow Schedule: Fan controlled by program (see pages
16
-18).
Note: Touch Auto or On to temporarily override the programmed fan
schedule.
FAN
Done
To Next Page
Loading...
