69-2715EF—07 18
Overriding schedules: home use
1 Touch p or q to adjust the temperature
(right side of screen) and the Hold Until
time (left side). The schedule will resume
when the Hold Until time expires.
2 Touch Switch to Permanent Hold to keep
the same temperature until you change it
or resume the program schedule.
3 Touch Cancel Hold at any time to resume
the program schedule.
Switch To
Permanent Hold
Overriding schedules: business use
Touch p or q to adjust the temperature.
It will be maintained until the hold time
you set.
• To change the hold time, touch the
Hold Until arrow buttons. This time can
be adjusted up to the maximum time
set on the Override Duration screen in
Advanced Preferences (page 27).
• Touch Override to use a pre-set occupied
temperature if a person uses the room
during an unoccupied period. The new
temperature will be maintained for 1 hour
and can be adjusted up to the maximum
time set on the Override Duration screen
in Advanced Preferences (page 27).
The programmed schedule will resume when
the override timer expires. Touch Cancel Hold
at any time to resume the program schedule.
OVERRIDE
To Next Page
Loading...
