69-2715EF—07 16
Pre-set energy-saving schedules
This thermostat uses default Energy Saver settings that can reduce your heating/
cooling expenses. To customise settings, see next page.
Period Start time
Heat
(Mon-Fri)
Cool
(Mon-Fri)
Heat
(Sat-Sun)
Cool
(Sat-Sun)
Wake 6:00 am 70°F (21°C) 78°F (25.5°C) 70°F (21°C) 78°F (25.5°C)
Leave 8:00 am 62°F (16.5°C) 85°F (29.5°C) 62°F (16.5°C) 85°F (29.5°C)
Return 6:00 pm 70°F (21°C) 78°F (25.5°C) 70°F (21°C) 78°F (25.5°C)
Sleep 10:00 pm 62°F (16.5°C) 82°F (28°C) 62°F (16.5°C) 82°F (28°C)
Home Use
Period Start time Heat Cool Fan
Occupied 1 8:00 am 70°F (21°C) 75°F (24°C) On
Unoccupied 1 10:00 pm 55°F (13°C) 85°F (29.5°C) Auto
Occupied 2* 12:00 am 70°F (21°C) 75°F (24°C) On
Unoccupied 2* 12:00 am 55°F (13°C) 85°F (29.5°C) Auto
Business Use
* Period 2 is cancelled by default. If you activate it, the values shown above are
default settings.
Setting system mode
1 Touch SYSTEM to display system settings.
2 Touch desired option:
Heat: Thermostat controls only the heating
system.
Cool: Thermostat controls only the cooling
system.
Off: Heating/cooling systems are off.
Automatic: Thermostat selects heating or cooling as needed
depending on the indoor temperature.
Emergency Heat (heat pumps with aux. heat): Controls
auxiliary/emergency heat. Compressor is locked out.
3 Touch Done to save and exit.
Note: The Automatic and Emergency Heat system settings may not
appear, depending on how your thermostat was installed.
SYSTEM
Done
To Next Page
Loading...
