S7999D1048 COMBUSTION SYSTEM OPERATOR INTERFACE DISPLAY
13 65-0321—01
Clamp Filters
To protect against conducted and radiated transient noise, use
clamp filters (included in 50063482-001 Bag Assembly). Install
clamp filters on 24V, COM1, and COM2 wires. See Fig. 12 and
13.
Fig. 12. Install clamp filters on 24V, COM1, and COM 2
wires.
Fig. 13. Clamp filter in place.
Battery
1. Remove battery compartment cover on back of the dis-
play.
Fig. 14. Battery compartment.
2. Install CR2032 coin battery (included in 50063482-001
Bag Assembly). Be sure to follow polarity markings on
the display.
Fig. 15. Install CR2032 coin battery.
3. Replace battery compartment cover.
To Next Page
Loading...
