S7999D1048 COMBUSTION SYSTEM OPERATOR INTERFACE DISPLAY
17 65-0321—01
Fig. 25. Local S7999D with connection to System Modbus network and Modbus gateway.
— Disable port (NOT USED): when this option is
selected, the Com port is disabled. If a Com port is
not being used, it is recommended that the port be
disabled.
9. Screen Saver
The Screen Saver tab allows a screen saver function to be
enabled. Touch the “Enable Screen Saver” box to enable (box
checked) or disable the screen saver (box unchecked). When
the screen saver is enabled, the idle wait time can be adjusted
from 1 to 99 minutes. Factory screen saver types include
“Random Balls” or “Date and Time”. A customized screen
saver image can also be loaded into the S7999D display; (see
“Image Customization” on page 21). When a customized
screen saver image has been added, a third type screen saver
type, called “Bitmap” will be visible. Select the “Bitmap” type for
the customized screen saver image.
Fig. 26. Screen saver tab.
10. Language
The S7999D provides 2 language options (English and
Spanish). To change the language type, select the Language
type and then select the desired language and touch the “Set
Language” button. Note; changing the language requires a
display reboot to take effect.
Fig. 27. Language tab.
11. Title
This option provides the means to add a Title (max 30
characters) to the Home page. Touching the Home Page Title
bar (yellow field) brings up the Home Page Title page. A
S7810M
MODBUS
RM78xx
BURNER
CONTROL
S7830
EXPANDED
ANNUNCIATOR
R7999
FUEL AIR
RATIO CONTROL
UDC2500
THERMAL
SHOCK
S7999D
SYSTEM DISPLAY
COM 1 OR COM 2
M34033A
LOCAL S7999D
COM 1 OR COM 2
MASTER
SLAVE
SLAVE
LOCAL
MODBUS
CONTROLBUS
SLAVE
UDC2500
STACK
TEMPERATURE
UDC2500
FEED PUMP
LEVEL CONTROL
SLAVE
UDC2500
PID LOAD
CONTROL
SLAVE
UDC2500
STEAM/FUEL
FLOW
SLAVE
SLAVE
MODBUS BAUD RATE MUST BE SET FOR EITHER 9600 OR 19200.1
2
1
ANY MODBUS BAUD RATE CAN BE USED; HOWEVER THE SELECTED BAUD RATES MUST MATCH.
2
TO
BUILDING
AUTOMATION
SYSTEM
To Next Page
Loading...
