Honeywell ScanPal EDA61K Series User Manual

14 ScanPal EDA61K Mobile Computer
About the Good Read LED
The Scan Status LED indicates the read status of the imager when scanning a
barcode. When active, the LED illuminates the outer ring of the front speaker. To
learn more about how to use and configure the imager engine for scanning, see
Use the Image Engine beginning on page 31.
Scan Status LED Descriptions
About the Keypad
The EDA61K keypad configurations.
LED Color Description
Green Good read of a barcode.
Red Failure to scan barcode.
Check to make sure you have the correct symbology enabled.
Scan Status LED
Alphanumeric Keypad
Numeric Keypad

Honeywell ScanPal EDA61K Series Specifications

General

Operating System	Android 9 (Upgradeable to Android 10)
RAM	3 GB
Processor	Qualcomm Snapdragon 1.8 GHz octa-core
Display	4-inch WVGA (480 x 800) capacitive touchscreen
Storage	32 GB
Camera	13 MP rear camera
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2
Scanner	1D/2D imager
Durability	IP65
Keypad	Numeric ( keys) or QWERTY ( keys)
Operating Temperature	-10°C to 50°C
GPS	Yes, GPS with support for GLONASS