ScanPal EDA61K Mobile Computer 19
4. Insert the microSD card into the card holder with the contacts facing out.
5. Close the holder with the card inserted. Press down gently on the card holder
and slide it into the locked position.
6. Close the card access door.
7. Install the battery, refer to page 7.
8. Press the Power button to turn On the computer.
How to Transfer Files
To transfer files you need to physically connect the EDA61K mobile computer to
your workstation (e.g., laptop or desktop computer) through a USB connection.
When the mobile computer is connected and USB is configured for file or photo
transfer, use a file browser (e.g., File Explorer or Windows Explorer) on your
workstation to transfer files between the two computers. If you are transferring files
to and from a Mac, use the Android File Transfer application (available from
www.android.com/filetransfer).
Note: File transfer through a USB connection is disabled by default. You need to configure
the USB connection for transferring files or photos.
You can use these accessories to connect your mobile computer to your
workstation:
• Home Base or Ethernet Home Base, and a standard USB Type B to A cable.
To Next Page
Loading...
Need help?
General