Honeywell ST9400C - Built-in Programmes; Personal Programme Setup

6
PROGRAMMING YOUR ST9400C
The Built-in Programmes
The built-in programmes give you a starting point that you can personalise to your own
requirements. Your Installer should have selected one and ticked the box alongside it. If there
is no tick, the product normally leaves the factory with Profile A installed, but it is a simple
matter to select one of the other profiles (see Changing the Installer Parameters, page 12).
Built-in Programme (Profile A)
ON 1 OFF 1 ON 2 OFF 2 ON 3 OFF 3
Monday to
Friday
Heating
6:30am 8:30am 12:00pm 1:00pm 4:30pm 10:30pm
Hot Water
6:30am 8:30am 12:00pm 1:00pm 4:30pm 10:30pm
Saturday &
Sunday
Heating
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Hot Water
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Built-in Programme (Profile b)
ON 1 OFF 1 ON 2 OFF 2 ON 3 OFF 3
Monday to
Friday
Heating
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Hot Water
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Saturday &
Sunday
Heating
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Hot Water
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Built-in Programme (Profile C)
ON 1 OFF 1 ON 2 OFF 2 ON 3 OFF 3
Monday to
Friday
Heating
6:30am 7:30am 12:00pm 12:00pm 5:00pm 10:00pm
Hot Water
6:30am 7:30am 12:00pm 12:00pm 5:00pm 10:00pm
Saturday &
Sunday
Heating
8:30am 9:30am 12:00pm 1:00pm 5:30pm 10:30pm
Hot Water
8:30am 9:30am 12:00pm 1:00pm 5:30pm 10:30pm
ON 1 OFF 1 ON 2 OFF 2 ON 3 OFF 3
Monday Heating
Hot Water
Tuesday Heating
Hot Water
Wednesday Heating
Hot Water
Thursday Heating
Hot Water
Friday Heating
Hot Water
Saturday Heating
Hot Water
Sunday Heating
Hot Water
Your Personal Programme
The table below has been left blank for you to record your own personal programme.