Honeywell ST9500C - Configuration & Service Data; Configuration Data for Installer

18
50022737-007 A
CONFIGURATION & SERVICE DATA
Configurable
Features
Options Installer Configured
(tick appropriate box)
24hr or am/pm clock
display
am/pm display
24hr display
Display backlight
operation
Off
On if button pressed
On continuously
Automatic time
change
Enabled
Disabled
1-day or 5/2-day or
7-day operation
1-day operation
5/2-day operation
7-day operation
Number of ON/OFFs
per day
2 on/offs per day
3 on/offs per day
Default programme A = standard
b = at home
C = economy
Zone Configuration Zone 1 =
e.g. downstairs
Zone 2 =
e.g. upstairs
Configuration Data (to be completed by Installer)
The table below is for the Installer to complete to indicate how your ST9500C has
been configured.