Honeywell ST9500C - Programming Your ST9500 C; The Built-in Programmes; Your Personal Programme

6
PROGRAMMING YOUR ST9500C
The Built-in Programmes
The built-in programmes give you a starting point that you can personalise to your own
requirements. Your Installer should have selected one and ticked the box alongside it. If there
is no tick, the product normally leaves the factory with Profile A installed, but it is a simple
matter to select one of the other profiles (see Changing the Installer Parameters, page 12).
Built-in Programme (Profile A)
ON 1 OFF 1 ON 2 OFF 2 ON 3 OFF 3
Monday to
Friday
Zone 1
6:30am 8:30am 12:00pm 1:00pm 4:30pm 10:30pm
Zone 2
6:30am 8:30am 12:00pm 1:00pm 4:30pm 10:30pm
Saturday &
Sunday
Zone 1
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Zone 2
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Built-in Programme (Profile b)
ON 1 OFF 1 ON 2 OFF 2 ON 3 OFF 3
Monday to
Friday
Zone 1
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Zone 2
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Saturday &
Sunday
Zone 1
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Zone 2
6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Built-in Programme (Profile C)
ON 1 OFF 1 ON 2 OFF 2 ON 3 OFF 3
Monday to
Friday
Zone 1
6:30am 7:30am 12:00pm 12:00pm 5:00pm 10:00pm
Zone 2
6:30am 7:30am 12:00pm 12:00pm 5:00pm 10:00pm
Saturday &
Sunday
Zone 1
8:30am 9:30am 12:00pm 1:00pm 5:30pm 10:30pm
Zone 2
8:30am 9:30am 12:00pm 1:00pm 5:30pm 10:30pm
ON 1 OFF 1 ON 2 OFF 2 ON 3 OFF 3
Monday
Zone 1
Zone 2
Tuesday
Zone 1
Zone 2
Wednesday
Zone 1
Zone 2
Thursday
Zone 1
Zone 2
Friday
Zone 1
Zone 2
Saturday
Zone 1
Zone 2
Sunday
Zone 1
Zone 2
Your Personal Programme
The table below has been left blank for you to record your own personal programme.