Honeywell STD110 User Manual

06/03 34-ST-99-22 (Addendum to 33-ST-25-14B) 3 of 8
Table 2 Torque Table - Process Head Bolts/Nuts
Bolt Type
Meterbody Type
51452557-001
(Carbon Steel)
5142557-002 and -003
(NACE and Non-NACE
Stainless Steel)
51452557-004
(B7M Alloy Steel)
51451864XXXX, NOT
XX5
(All Transmitter except
Draft Range)
67,8 N•M +/- 3,4 N•M
(50.0 Lb-Ft +/- 2.5 Lb-
Ft)
56,9 N•M +/- 2,8 N•M
(42.0 Lb-Ft +/- 2.1 Lb-Ft)
48,8 N•M +/- 2,4 N•M
(36.0 Lb-Ft +/- 1.8 Lb-Ft)
51451864XX5
(Draft Range Transmitter
only)
20,3 N•M +/- 1,0 N•M
(15.0 Lb-Ft +/- 0.8 Lb-
Ft)
20,3 N•M +/- 1,0 N•M
(15.0 Lb-Ft +/- 0.8 Lb-Ft)
20,3 N•M +/- 1,0 N•M
(15.0 Lb-Ft +/- 0.8 Lb-Ft)
Figure 1 ST 3000 Model STD110, STD120, STD130, STD170, STD924, STD930, STD974
(Rev S or greater)

Honeywell STD110 Specifications

General

Brand	Honeywell
Model	STD110
Category	Transmitter
Language	English