63-2604 B.B. 9-03 www.honeywell.com/yourhome
Printed in U.S.A. on recycled
paper containing at least 10%
post-consumer paper fibers.
Automation and Control Solutions
Honeywell International Inc. Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MN 55422 Scarborough, Ontario
M1V 4Z9
NOTE: The default temperature setting
is the Not Occupied setpoint.
3. Press to display the default setpoint.
NOTE: The only way to change this set-
point is to change the Not Occu-
pied setpoint.
Changing Temperature Setpoint
Until Next Program Period
1. Press up ▲ or down ▼ until the
desired temperature is displayed.
2. The temporary temperature appears for
approximately ten seconds, then the
room temperature is displayed.
To Previous Page
Loading...
