2 63-2604
FEATURES
• Typically used in buildings (including:
restaurants, shopping malls, office
buildings and banks) under 55,000
square feet.
• For single zone rooftop units, split
systems, heat pumps or hot/chilled water
systems.
• 7-day programming.
• Two Occupied and two Not Occupied
periods per day.
• Keypad multi-level lockout available with
all models.
• Individual heat and cool setpoints
available for Occupied and Not Occupied
periods.
• Convenient overrides allow temporary
setpoint changes.
• Intelligent Fan™ feature energizes fan
continuously in the Occupied periods. Fan
can also be configured for conventional
heat or electric heat fan operation.
• Remote sensor capability for temperature
(including outdoor air and discharge air)
and humidity sensors.
• P+I+D control minimizes temperature
fluctuations.
• Recovery ramping control automatically
optimizes equipment start times based
on building load.
• Thermostat Interface Module (TIM)
connections to thermostat from PDA for
advanced configuration, programming,
etc.
• Universal Versaguard™ Thermostat
guards available.
To Next Page
Loading...
Need help?
General
