EasyManua.ls Logo

Honeywell T7350 User Manual

Honeywell T7350
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PRODUCT DATA
62-2605-09
T7350 Commercial Programmable Thermostat
FOR SINGLE- OR MULTI-STAGE CONVENTIONAL/HEAT PUMP SYSTEMS
APPLICATION
The T7350 Commercial Programmable Thermostat controls
24 Vac commercial single zone heating, ventilating and air
conditioning (HVAC) equipment. The T7350 consists of a
thermostat and subbase. The thermostat includes the keypad
and display for 7-day programming. The subbase includes
equipment control connections. The subbase mounts on the
wall and the thermostat mounts to the subbase.
FEATURES
Typically used in buildings (including: restaurants,
shopping malls, office buildings and banks) under
55,000 square feet.
For single zone rooftop units, split systems, heat
pumps or hot/chilled water systems.
7-day programming.
Two Occupied and two Not Occupied periods per day.
Advanced configuration using TStatSpec software or
PDA.
Individual heat and cool setpoints available for
Occupied and Not Occupied periods.
P+I+D control minimizes temperature fluctuations.
Recovery ramp control automatically optimizes
equipment start times based on building load.
Convenient overrides allow temporary setpoint
changes.
Keypad multi-level lockout available with all models.
Remote sensor capability for temperature (including
outdoor air and discharge air) and humidity sensors.
Auxiliary subbase contact typically interface with a
Honeywell Economizer System (for total rooftop
control integration) or act as dehumidification output.
Universal Versaguard™ Thermostat guards available.
T7350H provides networking capability on LonWorks
®
Bus using a Free Topology Transceiver (FTT).
T7350H Conforms to LonMark
®
Space Comfort Profile
for rooftop applications.
continued
Contents
Specifications ................................................................... 3
Installation ........................................................................ 6
Settings ............................................................................ 11
Installer Setup .................................................................. 12
Programming .................................................................... 16
Operation .......................................................................... 19
Troubleshooting Guide (Table 19) ..................................... 25
Wiring Diagrams (Fig. 17-25) ........................................... 27
Appendix - PDA Usage ..................................................... 32

Other manuals for Honeywell T7350

Questions and Answers:

Honeywell T7350 Specifications

General IconGeneral
BrandHoneywell
ModelT7350
CategoryThermostat
LanguageEnglish

Summary

FEATURES

Features Available via TStatSpec or PDA Configuration

Details on configuring the thermostat using TStatSpec software or a PDA for advanced settings.

Features via Optional Network Model-H

Specific features and network capabilities offered by the T7350H model when connected to a LonWorks® bus.

INSTALLATION

Location

Guidance on selecting an appropriate installation location to avoid environmental factors affecting thermostat accuracy.

Subbase

Instructions for installing the subbase, including considerations for sensing room temperature and mounting methods.

SETTINGS

System Settings

How to configure the thermostat's system mode, such as Auto, Cool, Heat, Off, or Emergency Heat.

Setting Temperature

Guidance on adjusting occupied and not occupied temperature setpoints according to the system's needs.

INSTALLER SETUP

Setup Using Keypad

Procedures for configuring the thermostat directly via its keypad, accessing installer setup options.

Configuration

Steps for configuring the thermostat using a PDA or TStatSpec software, including critical system variables.

PROGRAMMING

Setting Current Day/Time

Instructions for setting the thermostat's internal clock and calendar for accurate scheduling.

Setting Schedule Times

How to program occupied and not occupied time periods for each day of the week to optimize comfort and energy use.

Programming Temperature Setpoints

Adjusting the specific heat and cool setpoints for occupied, not occupied, and standby periods.

OPERATION

P+I+D Control

Understanding the proportional, integral, and derivative control algorithm used for precise temperature management.

TROUBLESHOOTING GUIDE (TABLE 19)

APPENDIX - PDA USAGE

Configuration

Detailed steps for configuring the thermostat, either offline or while connected to the device, using the PDA tool.

Related product manuals